it - Italian

VHP Decontamination Lock

VHP Decontamination Lock

Material airlock providing rapid H2O2 decontamination

Decontamination locks are most frequently used as a pass-through to transfer material between rooms with different classes of cleanliness (typically B and C), whereas material must be decontaminated (by means of surface sterilization) before entry into the room. Loaded materials are decontaminated using hydrogen peroxide vapour with a 6-log reduction. A hydrogen peroxide vapour generator is a part of the equipment.

Caratteristiche

  • Integrated VHP generator
  • Decontamination pass-through cabin may be fitted onto the wall separating individual rooms
  • Lock complies with the leak tightness classes pursuant to ISO 10648-2
  • “B” class cleanliness according to the EU GMP Standard
  • Sistema di controllo elettronico per la correzione automatica dei parametri operativi di base gestiti da PLC Siemens
  • Color touchscreen controls
  • Mobile perforated shelves allow sterilization of the product from all sides
  • Process works at normal temperatures (at about 25 to 30 °C) and normal pressures
  • Jacket material – stainless steel AISI 304
  • Pass-through chamber material – AISI 316L with a thickness of 3.00 mm, polished surface finish, Ra < 0.6 µm
  • Rounded corners R = 55 mm
  • Inlet and outlet H14 HEPA filtration
  • Possible validation of decontamination cycle
  • Possible data recording on a recording unit, printer or PC
  • Low operating costs
  • Decontamination a low-temperature
  • Quick interval of a decontamination cycle
  • Long operation life, minimal maintenance demands
  • Easy handling and operation

Variants

  • VHP Decontamination Lock with a closed loop system
  • VHP Decontamination Lock with an open loop system

Preparazione

For operation of the equipment, the following must be ensured:

  • Pressurised air of pharmaceutical quality (dry, oil-free, 4 bars)
  • Electric power supply – 230V, 3kW
  • Connection to the exhaust branch for venting hydrogen peroxide vapours

Componenti

Cabina per la sicurezza biologica di classe III - Componenti
  1. Interruttore principale
  2. Control panel
  3. Chamber closing door
  4. Perforated shelves
  5. Compressed air inlet
  6. Air exhaust
  7. Air inlet
  8. Paperless recorder

Configurazione di base e opzioni extra

Configurazione base

Chamber closing door

It is made of PMMA with a thickness of 25 mm. The door is sealed using a pneumatic seal made of silicon. The closing of the door is monitored by a sensor; another sensor monitors the mechanism which prevents the door from being opened.

VHP distribution

Distribution pipe for optimal gassing inside the chamber

Perforated shelves

4 pcs of standard perforated shelves for loaded material

Caratteristiche di sicurezza

Valvola pneumatica

Opzioni

  • H2O2 concentration sensor – high – process sensor inside the chamber
  • H2O2 concentration sensor – low – safety sensor inside the chamber
  • H2O2 concentration sensor – low – safety sensor outside the chamber

Display

Cabina per la sicurezza biologica di classe III - Display

Panoramica delle funzioni

  • Accesso registrato dell’utente e log-out automatico dopo un tempo prestabilito
  • Display for measured physical values in the chamber interior
  • Device operation modes menu, Alarm and Settings menu

Progetti

Cabina per la sicurezza biologica di classe III

VHP Decontamination Lock

Dimensioni in mm - VHP Decontamination Lock 1

Larghezza 1900
Altezza 2640
Profondità 1600
Closing door height 2100
Closing door width 800

Dimensioni in mm - VHP Decontamination Lock 2

Larghezza 1150
Altezza 2795
Profondità 840
Closing door height 800
Closing door width 800

Download

Free download

Name Type Availability Size
VHP Decontamination Lock_EN_2021 pdf 6.35 MB
BLOCK Technology_Company profile_EN pdf 11.84 MB
BLOCK Technology_Overview_EN pdf 2.3 MB